NFA - Formable 2 in 1
REF :NFA125
Add to Product Board
Genesis NFA is an innovative reversible formable Aluminium profile for step edges, the profile can be fitted either way around thus making it suitable for 10mm or 12mm deep floor coverings. The flange is specially designed to provide a straight edge to the step but can also be easily formed on site by hand to create a curved step edge.
Available in bespoke powder coating to any RAL number on request.
| Product | |
| Height (mm) | 3 x 10/12mm |
| Length (m) | 2.6 |
| Box Quantity | 20 |
| Title | |
|---|---|
| NRA / NLT / NLM / NFA / NAT / NIB Drawings | NRA / NLT / NLM / NFA / NAT / NIB Drawings |
| NFA Datasheet | NFA Datasheet |
When installing with Tile Adhesive this should offer adequate fixing, however, if required most tile in nosings offer a mechanic fixing method using 5mm holes within the flange making them suitable for Wood and Laminate floors that do not require Tile adhesive.
- Check the fit of the nosing and ensure the profile is the correct height and width for the step and floor covering.
- Install the floor covering on the riser.
- Place the nosing firmly on the step and if necessary mark the floor.
- Drill and Plug the floor if Mechanically fixing.
- Apply the adhesive using a suitable notched trowel to the manufacturers recommendations.
- Bed the profile into the adhesive ensuring that the adhesive comes through all the flange holes, spread the adhesive over the top of the flange before installing tiles.
- A grout gap is not required however if visible ensure that grout is compressed firmly within the gap.